Description
FEATURES
- Initial colour: Clear hazy to light yellow
- Final colour: Light yellow
- Maximum Gap: .25”
- Hardness, Shore D: 75-83 (After full cure)
- Set Time: 30 minutes @ 65-80°F
- Shear Strength, Steel: 2000 psi (± 20%); aluminium: 1400 psi (± 20%)
- Handling Time: After 7 hours
- Full Strength: 24 hours
- Operating Temperature Range:-65 – 225°F (-54 – 107°C)
DETAILS
Delayed Setting Time Epoxy Adhesive is the perfect product to use when you need more time to work to get your project pieces in place. This product allows you 30 minutes to arrange and rearrange pieces. 2000 psi strength is great for metal, glass, ceramic and plastic. Cures to a light yellow colour.
Directions:
- Surfaces should be clean and dry, free from oil and grease.
- Roughen surfaces with emery cloth or sandpaper for best results.
- Dispense from container following package directions & mix thoroughly, for about 1 minute.
-
- Apply to both surfaces and mate parts together.
- Remove excess epoxy immediately with denatured alcohol.
- Sets in 30 minutes at room temperature (77F or 25C) with full cure in 24 hours.
Reviews
There are no reviews yet.