Description
FEATURES
- Initial colour: Clear hazy to light yellow
- Final colour: Light yellow
- Positioning time 2-3 minutes.
- Set Time: 4-6 minutes @ 65-80°F
- Handling Time: After 30 minutes
- Full Strength: 24 hours
- Maximum Gap: .25″
- Hardness, Shore D: 75-83 (After full cure)
- Shear Strength, Steel: 1200 psi ( 20%)
- Operating Temperature Range: -40°F to +176°F (-40°C to +80°C)
DETAILS
Quick Setting Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. Sets in 5 minutes, allowing time for repositioning; handling time after 30 minutes. 1200 psi is formulated for all-purpose bonding, such as glass, metal, china, wood, fiberglass and more.
Directions:
- Surfaces should be clean and dry, free from oil and grease.
- Roughen surfaces with emery cloth or sandpaper for best results.
- Dispense from container following package directions and mix thoroughly until colour is uniform.
- Apply to both surfaces and mate parts together.
- Remove excess epoxy immediately with denatured alcohol.
- Sets in 90 seconds at room temperature (77F or 25C) with full cure in 24 hours.
Reviews
There are no reviews yet.