5 Minute Quick Setting Single Use Epoxy Gel (0.14oz, 4g)

FEATURES

• Positioning time 2-3 minutes
• Initial colour: Green resin/hazy white hardener
• Final colour: Hazy white
• Maximum Gap: .25‚Äù
• Hardness, Shore D: 75-85 (After full cure)
• Set Time: 4-6 minutes @ 65-80¬∞F
• Shear Strength, Steel: 1500 psi (¬± 20%); aluminium: 900 psi (¬± 20%)
• Handling Time: After 1 hour
• Full Strength: 24 hours
• Operating Temperature Range: -36 to 149¬∞C (-32 to 300¬∞F)

DETAILS

Single Use Quick Setting Gel Epoxy Adhesive is the perfect product to use when you need to get your project pieces in place fast. This product fills gaps and covers large porous surfaces. The final cure colour is cream but can be mixed with paint to colour match. Package contains just the right amount of product for most small projects. The metal tubes dispense effortlessly, and are easy to mix. This product sets in only 5 minutes.

Directions:

• Surfaces should be clean and dry, free from oil and grease.
• Roughen surfaces with emery cloth or sandpaper for best results.
• Dispense from container following package directions & mix thoroughly, approximately 1 minute. Use package blister or clean cardboard for mixing container, do not use metal.
• Apply to both surfaces and mate parts together.
• Remove excess epoxy immediately with denatured alcohol.
• Sets in 4-6 minutes at room temperature (77F / 25C) with full cure in 24 hours.